This project is for a Lance Rest for Robert.
It is made from 1/2 inch 304 Stainless Steel

This page is depicting as we work on the Armour.

-18 May 2015-
The pattern on the steel.
The raw cut.
Lineup of the pieces. Drilling the holes for the pin.
Both are now drilled. Raw idea of the rest with the pin.
-19 May 2015-
General update.
-20 May 2015-
All the parts are 304 SS but the brass screws.
The End.

To the

Klaus Jurgen Gehr (Armorer)

You can contact me at:
Last Modified: May 18, 2015